NATIONALITY : British

DRIVING LICENCE : Current / Clean

KEY QUALIFICATIONS : Chartered Engineer

: B.Sc. (Hons) Environmental Engineering*

(Upper Second 2:1)

Strathclyde University, Glasgow

* (split Building Services / Mechanical Eng course)

: HND Mechanical Engineering

(Distinction)

Glasgow College of Technology

: OND Mechanical Engineering

Stow College, Glasgow

: C.Eng., MCIBSE, MASHRAE, M I of E

TRAINING

: Offshore Combined Survival and Safety

Course, RGIT, Aberdeen

: Offshore Medical

Expiry Date: March. 2002

Permit to Work (PTW) Signatories Course (Shell UK)

Completed: 25.03.96

Shell MAPS No: 2025526

Course in Vibration Analysis

(D.E.I Eng Ltd) 10.05.97

: Course in Environmental Acoustics

(Sound Attenuators Ltd): 08.08.89

: Computer literate, in the following programmes:

Microsoft Word, Excel, Project, Access & PowerPoint

AutoCAD 2006

Mathcad

Hevacomp, Carrier E-20 II & Cymap

LANGUAGES : English (Good)

: French (Good)

SUMMARY OF WORK EXPERIENCE

Eighteen years experience within the Oil & Gas industry, the last fifteen years of which were mainly concerned with Offshore Mech. / HVAC / Building Services Detail Design, Construction, Maintenance and Commissioning related issues. HVAC design projects directly involved with, FPSO and Platform Living Quarters, Drilling and Topside module Design. Scope of work included: Bid Evaluation, Estimating, Module Fabrication Punchout, Job Card writing leading to Work Pack Development, Pre-engineering prior to Work Implementation. Fully conversant with most Major Oil Company Safety Management Systems / Permitry, Pre-Commissioning and Commissioning of HVAC Systems, also I am familiar with both British and American Codes and Practices.

Formative years of my career, I was a Resident Mech Eng. with a Onshore based Consultancy. Mainly involved in the design of M & E Building Services for both the Private Sector and Military Installations, including all aspects of Mech / HVAC / Fire Protection design. Responsible for Project Supervision, M & E Co-ordination, use of computer based calc's (spreadsheets), planning, estimating, procurement, multi-discipline designpack compilation and finally Test and Commissioning. For both onshore & offshore based projects.

Particular interests being HVAC Building Services design, Maintenance and site supervision / engineering of industrial and commercial heating & ventilation, air conditioning, fire protection services, plumbing & drainage services, lighting, acoustics, Building Automated Control & Monitoring and Commissioning, in connection with NHS and private sector hospitals, hotels, schools, military and industrial installations.

EMPLOYMENT HISTORY

DATECOMPANY

June '00 - Present Qatar Petroleum, Doha, Qatar

Snr HVAC / Building Services Eng.

Sole responsible for overseeing the HVAC / Building Services design (FEED) intent, in preparation for the EPIC Contractors. Involved with the overview of current HVAC content of onshore and offshore oil and non-oil related projects. With particular emphasis on design installation, Construction Supervision, Commissioning and Maintenance.

Client Site representative for the overseeing of the Building Services design for the Qatar Foundation Project, involving 11x1000 TR chiller plant

DEC. '98 - June '00 Wood Group Eng Ltd (Aberdeen)

Snr HVAC Design Eng.

Snr HVAC Eng. (Acting Lead Eng) responsible for all aspects of the HVAC design for the Brent EV Project (Enhanced Voidage), from 'cradle to grave' i.e. Conceptual, Design, Procurement, Construction and Commissioning and Maintenance. HVAC team member involved with the Shell Brent Field ISC Contract and other Corporate Wood Group Projects, namely: BP/Amoco, Texaco, Enterprise and Amerada Hess.

Lead Eng. for the HVAC Detail Design for the Shell Gas Lift Project on the Cormorant Alpha.

JAN. '98 - NOV. '98 AOC International Ltd

(1st Phase Snr. HVAC / Mech Constr Eng)

(2nd Phase Snr. HVAC Commissioning Eng)

During First phase, responsible for the pre-engineering and Construction implementation of Brent Delta LTFD Project. Responsible for the day to day running of the HVAC / Mech Offshore Construction Team. Duties included liasing with Project Management, planning & trouble-shooting and undertaking routine maintenance.

Second phase responsible to Commissioning Team to ensure smooth transfer of completed workscope from Commissioning to Operations. Duties include carrying out function and dynamic testing of mechanical equipment on the Process, Utility, Safety and HVAC systems. Liaison with DNV (Platform Certifying Authority) and Inspection during the Milestone Certificate of Fitness.

JAN. '96 - DEC '97SHELL UK Ltd

(Snr. HVAC Commissioning Eng)

Responsible for the day-to-day running of the HVAC Offshore Commissioning Team for the Brent Charlie LTFD Project. Living Quarters, Utility and Production Modules, Drilling Modules and the Drilling Rig Utilities. Focal Point Eng. for collation of the



Multi-discipline projects offshore, to ensure that all projects are completed before the acceptance of plant and systems from Construction to Operator. Liaising with DNV (Platform Certifying Authority) and Inspection during the Milestone Certificate of Fitness.

Onshore responsible for the preparation of FEED Design for new Brent Field Replacement Living Quarters (200 man), preparation Design Workpack and Commissioning procedures, Plans and Job Carding. Review of Commissioning spares requirements and Design Handover documentation.

JAN. '90 - JAN. '96AMEC Eng Ltd (formally Matthew Hall)

(Snr. HVAC Design Eng)

Shell Brent Field Redevelopment Project

Brent Detailed Design

Brent Charlie Refurbishment Detailed Design, specification of equipment, offshore surveys and workpack development; Living Quarters, Utility and Production Modules, Drilling Modules and the Drilling Rig Utilities.

Brent Field Safety Case

Safety Upgrade Conceptual studies for the Brent Field and in particular the Brent Charlie LTFD Conceptual Design.

Smoke and Gas Ingress Analysis performed field wide on behalf of the Safety Group. This analysis is a contributory factor in the determining of the overall Safety Case TR. Impairment Frequency.

Heat Stress Analysis for the Brent Field Temporary Refuge (Living Quarters) Safety Case.

Involved with HVAC / Safety area classification to API 15 Standards.

Conceptual Design Phase

Involved in the production of the Brent Bravo and Charlie LTFD Conceptual and Refurbishment Design Reports and Workpacks. Involving all aspects of budgetary estimation and equipment specification.

Brent Change Proposal (CP)

Design Team Member, involved in new or modified design scope to existing HVAC systems, by co-ordinated M & E workpack. Workscope comprises, Offshore surveys, data acquisition, detail design, procurement, installation workscope and job carding, commissioning, management of fabricators/vendors and QA design verification for auditing purposes.

Design Eng in charge of a small CAD Design group responsible for the implementation of ES/245 Fire Damper Replacement exercise for the Brent Field.

JUN '84 - JAN. '90NIFES CONSULTING GROUP Ltd

(Building Services Project Design Eng)

Mainly involved in all aspects of Building Services Design associated with onshore and offshore industry. All projects involved design, estimation, planning and/or trouble shooting of new or existing HVAC ventilation systems.

Offshore design work included the production of Mini Workpacks for the design of new and/or modifications/refurbishment to existing ventilation systems. The supervision of installation works, material quality controls



(BS 5750) and Test and Commissioning of HVAC systems onshore and offshore (during hook-up phase).

Onshore, main aspects of Building Services design including the preparation of drawings, calculations material specifications, equipment selection (factory acceptance tests) and procurement, installation design workscopes, project planning, man-hour and cost estimations and planned maintenance.

Platform associated with :

Shell Expro : Brent A, B, C, D and Spar

: Fulmar and Auk (Trouble Shooting)

: Dunlin Alpha

: N.Cormorant & Cormorant Alpha

: Tern & Eider

Hydrocarbons : AP1, CP1 and DP3

(GB Morecambe)

Britoil : Amethyst

Bluewater : Bleo Holm FPSO

Non-related offshore work involved Extended Energy Surveys (Government Funded Scheme), boiler/furnace design and flue gas analysis.

Building Services Design from full blown air conditioning to industrial ventilation schemes, LPHW systems to drainage, H.P compressed air systems to medical gas systems, lighting and acoustic design and main stream plumbing design.

Sectors include Hospitals (for the CSA), Private Housing (CEP Schemes), Government Installations (for the PSA), Microchip Factories (Clean Air Application) and Pharmaceutical Manufacturers (Industrial Ventilation).

AUG '83 - JUN '84British Petroleum

(HVAC Post-Graduate Secondment)

Involved onshore in assisting with the co-ordination of the M & E services associated with the re-vamp of the HVAC systems for the 'BP Forties Field', in particular the Main Accommodation Blocks.

MAY '82 - AUG '83S.S.E.B

(Graduate Mech. Eng/Des)

Fields of concern within the Nuclear Industry, I was a member of the Test & Efficiency Dept. dealing with improving overall mechanical plant efficiency and calibration testing of 660MW steam turbines and exhaust flue gas analysis. Other areas of concern, the review of the existing maintenance procedures and practices and implementation and staff training of new maintenance routines, was a member of the design team set-up to re-develop the mechanical coal conveyancing equipment at one of Europe's largest coal fired power stations. (Longannet)