QUALIFICATIONS: ONC Electrical and Electronic Engineering

HNC Power, Machines, Electrical and Electronic Engineering

OU Studied T292 Instrumentation and T394 Control Engineering.

MEMBERSHIP: Member (M-16728) of the Institute of Measurement and Control.

Chartered Engineer (44078) registered with the Engineering Council.

January '06 - Present AKER KVAERNER

Area Lead Instrumentation Engineer - Fine Chemicals, & Polymers (Dow Corning)

FEP and detailed engineering of instrumentation and packaged plant control systems requiring integration into DCS and SIS.

August '05 - December '05 JACOBS ENGINEERING

Lead Process Controls Engineer - Biopharmaceuticals (Pfizer Sweden)

Lead process controls engineer responsible for the automation and instrumentation preliminary design and development for 10% estimate for a large scale microbial ( e-coli) manufacturing facility.

December '04 - July '05 BIOGEN IDEC (DENMARK) MANUFACTURING

Instrumentation & Automation Engineer - Biopharmaceuticals

Engineering support to the production and approval of EPC Contractor's detailed engineering design, procurement and installation documentation for Profibus, Foundation Fieldbus, traditional process instrumentation and DCS hardware for a large scale, multi-product mammalian cell manufacturing facility. Writing of manufacturing control systems URS for DCS and MES. Engineering support to the development of Delta-V DCS Physical Model software engineering design and validation documentation to GAMP4 and S88.01. Engineering support to FEED for the development of the Delta-V DCS Procedural Model software engineering.

September '03 - December '04 GLAXOSMITHKLINE

Controls, Instrumentation & Validation Engineer - Pharmaceuticals

Project engineering of Capital schemes. Development of URS' and Scopes of Work with Users and subsequent production of GAMP4 compliant lifecycle design and Validation documentation. Procurement of equipment, instrumentation, systems integration, installation and commissioning services. Liaison with Site Instrument Engineering resources for pre-commissioning and calibration of installed instrumentation and control systems. Supervision of installation and commissioning Contractors. Production and execution of IQ and OQ protocols.

November '01 - August '03 JACOBS ENGINEERING

Senior Process Controls Engineer - Biopharmaceuticals (Biogen Inc.)

Lead process control systems engineer responsible for the production of control philosophies, URS', detailed engineering & procurement documentation for an 8000 I/O process control DCS with Profibus DP networks for a large scale, multi-product mammalian cell manufacturing facility. Delta-V DCS & Profibus hardware and software engineering lifecycle documentation and qualification to GAMP4 and S88.01 upto Physical Model FAT. Production of URS' for Laboratory Information Management and Data Acquisition Systems & SCADA/PLC packaged plant control and instrumentation systems for an allied Fill Finish facility.

April '01 - November '01 THAMES WATER

Site Engineer Control and Instrumentation - Water Treatment

Completion of site supervision of the installation, pre-commissioning, site acceptance testing and commissioning of a SCADA & WAN replacement scheme for the fourth of London's largest water treatment works.

December '00 - March '01 KVAERNER PROCESS

Instrumentation Engineer - Fine Chemicals & Polymers (ICI)

Engineering documentation for the specification and sizing of control valves, actuators and accessories, for FEED and enquiry packages associated with two ICI licensed PTA plants.

November '98 - December '00 THAMES WATER

Site Engineer Control and Instrumentation - Water Treatment

Site supervision of the installation, pre-commissioning, site acceptance testing and commissioning of a SCADA/PLC based instrumentation and control system for an 840 MLD Ozonation plant with associated pumping stations, contactors, distribution chambers, chemical dosing & storage and 3.3KV/415V switchgear. Final development, integration and site acceptance testing of SCADA into an existing site network. FDS approval, attendance at CFAT, site supervision of the installation, pre-commissioning, site acceptance testing and commissioning of a SCADA & WAN replacement scheme covering three of four of London's largest water treatment works.

July '98 - November '98 BROWN & ROOT

Senior Control & Instrument Engineer - Water/Oil Projects

Preparation of design reports, control philosophies, P&ID's and associated documentation for field instrumentation, PLC's, SCADA, UPS', control valves and actuators for large distribution pumping stations, pipeline conveyance systems and reservoir inlets. Production of all necessary specifications, calculations, data sheets, schedules, procedures and vendor bid evaluations. Review of vendor documentation, FDS, FAT and SAT procedures.

September '96 - July '98 (KVAERNER) JOHN BROWN ENGINEERS & CONSTRUCTORS

Instrumentation Engineer - Fine Chemicals, & Polymers (ICI - Dow Corning)

Detailed engineering of instrumentation and packaged plant control systems requiring integration into DCS. P&ID management, production of all engineering design documentation, specifications, E&I installation scopes of work, purchase requisitions, bid evaluations, PLC control system life-cycle specifications, factory acceptance testing and works inspections, calculations for primary elements and control valve sizing.

March '96 - August '96 HUNTING BRAE

Engineering Authority C&I - Nuclear (AWE)

Responsible for formally reviewing and approving conceptual designs, tender evaluations and detailed designs. Attendance during FAT, SAT and Handover procedures with responsibility for recommendation to Facilities managers on acceptance of installed systems and software. Audit of existing systems for compliance with User's requirements, "fitness for purpose" and current standards. Co-ordination of site-wide policy on matters of C&I. Provision of technical guidance on C&I matters to site engineering, operations and maintenance.

June '90 - February '96 THAMES WATER

Lead Instrument Control & Automation Engineer - Water Treatment

Production of documentation for the specification, procurement, installation, test and commissioning of all field instrumentation, control elements and control systems interfacing with process plant & switchgear. Writing of URS' for a 12000 I/O distributed PLC control system with SCADA and dual redundant optical-fibre communications. Supervision of the development of a computer based dynamic control system model and a bespoke software driver between PLC and SCADA. Supervision of in-house ICA design staff and responsibility for approving Contractor's designs. Approval of FDS', FAT and SAT procedures and attendance at FAT/SAT. Site support.

December '86 - May '90 BROWN AND ROOT

Senior Control & Instrument Engineer - Nuclear (AWE)

Site supervision of installation and commissioning, training of commissioning staff and implementation of Setting To Work procedures and SAT's, writing of calibration procedures and approval of installation, commissioning, operation and maintenance manuals. Responsibility for a team of engineers and designers involved in the production of all necessary documentation and drawings for instrumentation and LV electrical services. Writing Installation and Setting To Work procedures, FAT/SAT procedures and system URS'. Engineering of instrumentation and control systems requiring integration into two autonomous DCS', working from basic design requirements and liaison with client. Writing technical, functional and test specifications, tender evaluations, engineering reports and design proposals.

December '85 - December '86 PCI LTD

Instrument Engineer - Sewage Treatment

Production of all necessary E&I drawings and documentation, for the design of control systems, instrumentation and MCC's requiring integration into a plant DCS. Development of control philosophies, MCC specifications, and control system URS'. Approval of FDS', FAT and SAT specifications. Works testing of MCCs, DCS FAT and liaison with sub-contract and construction personnel during installation and pre-commissioning. Site surveys and proposals to client.

August '84 - November '85 PALL EUROPE

Group Leader - Petro & Fine Chemicals, Polymers, Oil & Gas and Pharmaceuticals

Client liaison, tender preparation, system, instrumentation and equipment specification, engineering design, CAD, software programming, testing, supervision of installation and commissioning of packaged plant and skids for PLC or relay logic based in-line automatic filtration and dryer systems in both safe and hazardous areas.

December '78 - August '84 PATERSON CANDY INTERNATIONAL

Senior Electrical/Instrument Designer - Water Treatment

Design of PLC and relay logic process control systems, including software programming. Specifications for MCC's, diesel generator systems, instrumentation and E&I installation sub-contracts. Specification of cable management systems for HV, LV, and instrumentation systems; cable sizing and routing. Production of all necessary detailed design documentation. Supervision of installation and commissioning of field elements and control systems.

November '78 FAIREY MARINE

Electrical Design Draughtsman - Marine

Design of electrical and instrumentation systems on 40ft motor launch.

August '78 - October '78 CAMPER NICHOLSONS

Electrical Design Draughtsman - Marine

Design of electrical and instrumentation systems for 90ft motor sailor. Specification of equipment, design of electrical distribution, navigation, fire alarm and engine start-up/shut-down systems and associated control panels.

May '78 - July '78 PETTER DIESEL GENERATION

Electrical Design Draughtsman - Industrial

Diesel generating sets and control panels. Automatic mains-failure panels.

May '73 - April '78 VOSPER THORNYCROFT

Electrical Draughtsman - Marine

SITB approved apprenticeship.