CURRICULUM VITAE

Nationality. : British

Qualifications. : H.N.D. Electrical Engineering

O.N.C. Electrical Engineering

City & Guilds AutoCAD 2000 Stage 2

Personal Safety logbook No.N148590 (NOGEPA)

PBNA Safety course pt 1.

Type of employment desired

Electrical /control/instrument design or construction engineering.

No restraints on mobility.

Summary of work experience

Over the past 38 years I have gained experience in all aspects of engineering. During this time I have worked for over 7 years in the Middle East, Africa and Europe.

I have been involved in a senior design and engineering capacity for numerous engineering projects in the petrochemical field.

I have worked on design drawings, estimation for construction packages, production of instrument and electrical work scopes, logic sequence flow diagrams, production of data sheets, cost time resource documentation, F.A.T.'s, equipment reviews, specifying equipment and validation of equipment.

Over the past few years I have specialised in gas compression revamps having successfully completed the instrument engineering and design for Arco Thames platform installation of a new EGT Tornado turbine and Cooper Bessemer re-vamped compressor skid. Until recently I was working for ABB Offshore Systems on the control upgrade to ABB Advant system on Hydro Hiemdal platform main gas export compressors. Recently worked on a new accommodation hook-up for NAM in the Netherlands. At present I am working as an electrical engineer covering various compressor sites to produce up to date electrical drawings.

EMPLOYMENT HISTORY

August 2005 to DateMulti-tech Ltd. Warrington, Lancashire

At present I am employed as an Electrical Engineer for Multi-tech on the following projects:-

1. N.G.T. compressor station data capture project.

2. Boiler plant upgrade for a Scottish Gas LNG plant.

April 2005 to July 2005KBR Ltd. Runcorn, Cheshire

Position: - Senior Instrument Engineer

Project: - Broken Hill Petroleum Liverpool Bay De bottlenecking project for the Lennox and Douglas platforms. Work covered the following: - FEED studies, attendance at hazzop meetings, preparation of CTR's, Bid tabs, Data Sheets, Material requisitions and work packs.

May 2004 to March 2005BPA Ltd. Hinkley, Leicestershire

Was employed as an E&I technical Appraiser for Transco/NGT. Work covered all compressor and AGI sites mainland UK. Co-ordinating with data capture contractor Multitech to resolve various appraisal comments on drawings submitted.

September 2002 to April 2003Dresser-Rand (UK), Wythenshawe, Manchester

Employed as an instrument project engineer on refurbishment and upgrade of gas compression stations for SPDC (Shell Nigeria). Work involved the upgrade of various gas compression stations on the Aladija and Sapele-Oben pipelines. Work covered the installation of new Siemens plc based station control panels, safety systems, and renewal of gas metering (Rosemount instrumentation tied into Daniels 500 flow computer) Work also covered upgrading of power generation on gas compression stations.

March 2001 to September 2002 NAM/Wood-Stork, Velsen-Noord, Netherlands

Employed as an instrument engineer on various NAM platform upgrades. Worked on a new accommodation platform (by SLP) hook-up (K81) to an existing production platform located in the Dutch sector. Work covered extension to mod bus system.

May 1999 toFebruary 2001

Off work due to family commitments (looking after parents and wife)

November 1998 toApril 1999ABB (OS) Bergerveien Oslo, Norway

Employed as a senior instrument engineer on the Himdal 2000 upgrade project.

Working on upgrade of turbine and compressor controls from MK 2 Speedtronic and relay based Dresser compressor logic to ABB Advant OCS Discos control.

July 1997 to October 1998O.D.E. Venture Great Yarmouth

Employed as an instrument engineer on Arco project work.

The following lists a few of the projects I have worked on:

Trent fuel gas metering (installation of new Rosemount mass flow transmitter)

Thames separators level detection (installation of nucleonic level detection)

Thames AR gas analyser (installation of gas chromatograph)

Instrument job responsible engineer on Thames AP gas compression expansion project, covering the installation of a new EGT Tornado turbine and revamp of compressor skid.

Responsible for equipment specifications, validation of vendor-supplied equipment, factory acceptance tests, material requisitions, kick off meetings and overseeing that the instrument part of project work was carried out on time and within budget.

July 1996 to July 1997ABB Lummus Aliresa Dammam Saudi Arabia

Employed as an instrument design engineer on PPM projects for Saudi Aramco.

Worked on project design proposal for a new fire and gas system to replace existing systems on Zuluf field.GOSPS 1 & 2.

Also worked on Scada (Elsag Bailey) upgrade for the Berri field.

May 1995 to June 1996Grootcon EPMMC British Gas Easington terminal

Employed as an E & I engineer on a joint venture between Grootcon and Bechtel. Working for British Gas on southern basin Bravo and Alpha gas platforms.

Job responsible engineer for design and construction work packs, CTR'S, equipment specs, construction estimates and offshore survey reports.

The following lists some of the packages worked on:

Installation of new Marex wind speed system, Crane cab fire detection, P.A.systems upgrade, TLQ water system, auto S/D of HVAC, installation of ESDV's, crane monitoring system installation and crane slew ring/boom change out.

August 1992 to May 1995AMEC Eng Ltd Seafield House Aberdeen

Employed as a senior E & I designer on Brent field close out dept. Responsibilities covered the closing out of various work packs for the Brent field platforms, complying to HSE & UKOOA guidelines and at all times to BS5750. Worked on all discipline documentation in closing out work packs.

July 1989 to May 1992Chevron U.K. Ltd. Aberdeen

Employed as senior E & I designer responsible for the design & co-ordination of various upgrade projects for the Ninian field. The following lists some of the work packs covered during period:

Hydro cyclone package, firewater pump replacement, well dedication reconfiguration, reappraisal of ESD system due to McCarrick report, Separator upgrade, diesel centrifuge package, jetting pump system for well, rig removal package, fire and gas matrix system upgrade.

The design on the above projects covered Scada network systems, public address, fire & gas and Turnbill control systems.

January 1989 to July1989Wimpey Offshore Ltd Aberdeen

Employed as an instrument section leader on Shell Leman & Indefatigable accommodation upgrade project.

October 1988 to January 1989Statoil Mongstatt Rafinor Refinery Norway

Employed as an instrument engineer covering inst. and control queries that arose during loop testing.

August 1988 to October 1988 John Brown Eng. Ltd. Aberdeen

Employed as an offshore co-ordinator to lead a team of 8 designers on an as built exercise for Occidental on the Claymore platform. Work was carried out as part of a HAZOP study in the wake of the Piper Alpha disaster.

March 1988 to August 1988 Shell (UK) Exploration & Production Aberdeen

Employed as a technical support co-ordination engineer as part of an ESD task force (UEA/10) covering all control and shutdown functions and reviewing PEFS for the Brent field. Work involved the technical audit of relevant documents and drawings and the production of a database to correlate all findings.

November 1997 to March 1988 Cooper Energy Services U.K. Liverpool

Employed as a senior E & I designer, producing detailed construction drawings for a Rolls Royce Avon T535 gas turbine and 11Kv Brush generator set to be supplied to a 250,000 MTA naphtha cracking plant in Yochon Korea.

November 1984 to November 1987 Matthew Hall Eng. Ltd. Aberdeen

Employed as an instrument section leader, responsible for the production of detailed design drawings. Carried out project work for Texaco, Mobil, B.P., Britoil, Unocal and Shell.

March 1982 to August 1984 EMPAC Design Consultants Ltd. Aberdeen

Employed as Elect/inst Section leader running a team of designers engaged on various projects for Conaco Oil Co.

November 1981 to March 1982 Grootcon (UK) Ltd. Aberdeen

Employed as Senior Electrical designer on Amoco N.W.Hutton platform hook-up.

October 1980 to November 1981 Ai Rebdi Consultant Engineers Saudi Arabia

Employed as an electrical design and site engineer. Worked on various projects for Aramco. Also worked on a £5M beach complex at Jubail for the Royal Commission as a site electrical engineer.

January 1980 to October 1980 Pashler and Partners Consultant Engineers Liverpool

Employed as an electrical designer preparing detailed drawings for a new 250, bed hospital at Wrexham.

February 1979 to January 1980 Flour Nederland BV Amsterdam and Harleem

Employed as a senior electrical designer on Aramco Juaymah and Yanbu projects.

March 1978 to February 1979 Flour G.B. Manchester

Employed as an electrical designer on PVC plant projects for ICI Bain works and Wilhelmshaven GmbH

January 1977 to March 1978 Occidental Tripoli Libya

Employed as an electrical designer on various projects covering compressors, firewater pumping stations and crude oil desalters for concessions 103A &D.

July 1976 to January 1977 Esso Standard Libya Plc. at Marsa el Brega terminal

Employed as an electrical design draughtsman on GOSP and LPG plant work.

June 1973 to July 1976 G.E.C. Power Transmission division Stafford

Employed as an electrical design draughtsman from June 73 to Dec.74 on Nelson river DC transmission project. Employed as a contracts engineer from Dec 74 to July 75 working on Kingsnorth DC transmission project and a development project for a cross channel DC link.

June 1972 to June 1973 Massey Ferguson Mfg. Liverpool

Employed as an inspector and quality audit engineer responsible for mechanical and electrical inspection and testing on excavation machinery.

July 1970 to June 1972 Liverpool Polytecnic HND sandwich course

June 1969 to June 1970 Plessey Telecom Liverpool

Worked as a PBX tester

June 1965 to June 1969 English Electric/GEC Co. Liverpool

Served apprenticeship as a craft electrical fitter in various departments. Final year spent in transformer test department.