SKILLS AND EXPERIENCE

• I have had a wide and varied knowledge of electrical installation works from domestic to commercial, light to heavy industrial. New build to refurbishments. Pro-active and reactive maintenance.

• I have worked to drawings installing all systems electrical, in a large number of containments or Cable Management Systems from the method laid down with in the 16 ^th edition of the IEE reg's. Qualified to work on live equipment, single & three phase, mains and sub-circuit distribution, load balancing, cable calculations, control systems, alarms fire & intruder, CCTV, structured cabling industrial, relays & motor circuits, lighting automated & controls for mechanical services. As you will see from my CV the most recent postings I have been over seeing these types of installs.

• I have carried out servicing & maintenance of electrical equipment to a high standard. Conducted surveys, designed, priced, sourced materials, installed small works on up grades of existing electrical installations whilst under employment form varies contractors on commercial and domestic sites. These have all been inspected & tested to NICEIC standards in line with the current BS Standards and Building reg's.

• PC skills as follows: Outlook, Word, Access, Excel, Lotus 123, DOS, Windows 3.1 to XP, CAD (AutoCAD, voloview), 3D Studio Max, Lisp, Amtech electrical design suite, EES Simplest plus, Maximo and BIW. Limited knowledge of Networks (NT, Novell) and some C++ Java HMTL experience and have just started to get to grips with havacomp 19, DialLUX, MS Project.

EDUCATON AND TRAINING

J.I.B. Graded Technician (cscs) until 25 ^th March 2009

City & Guild's 2400 Design, Erection and Verification of Electrical Installation, Kingston College

City & Guild's 2380 16 ^th Edition Wiring Regulations BS 7671

City & Guild's 2360 Electrical Installation Pt 2, Southall College

City & Guild's 2360 Electrical Installation Pt 1, Uxbridge College

Certificate for Domestic Electrical Installers (Part P)

LUL Entry permit/ERA/Fire core & Engineering need renewing from Feb 07

BTEC HNC in Computer Aided Design using AutoCAD. Southall and Acton Colleges.

City & Guild's 4351 Computer Aided Draughting using AutoCAD. Southall College.

Appointed emergence First Aider from 24/09/2007

Full uk driving licence 10 points

Memberships

IEE CIBSE RICS

GOALS AND OBJECTIVES

I enrolled on a BTEC HNC Construction September 2004 to gain an understanding of the rules laid down by the CPI for the Standard Method of Measurement associative with electrical installation works for quotes costing and procurement. My C&G 2400 had started in the later part of the said month. I have earmarked several courses that CIBSE, IEE and ECS have to offer and hope to pick off these along with the electricity at works act as and when I am able to. One off these courses was a HNC contracting management held in high regard with ECA/CIBSE (distance learning).

My aim is to make my self as flexible to the integration of the installation electrical services as I can be (design, production and commercial). I have the experience to design, implement and commission most LV systems for electrification. I would relish more design and build work as well as exposures to mechanical related design. I am already a proficient AutoCAD draughts man, for which I have found a great tool in the massing of bill's of quantities for costing and for procurement that coupled with my hands on experience from within installation works gives me a great working knowledge of the components required to construct any given project. I have an interest in increasing my co-ordination skills related to build services although services co-ordination is no a problem for me. I Enjoy project based work and feel its where my strengths are set. I'm aiming to be a project manager and have started to investigate the path to achieve this through qualification, by taking up the relevant HSE guidance courses CDM, NEBOSH and further training on method statements and risk assessments through the CITB.

EMPLOYMENT HISTORY

June to September 2007

Site manager

Employed as a site manager running day-to-day operations on a project subjected to the CDM reg's on a F10. Build for a new com's suite for highflying city investors. Duties included site specific risk assessments review off contractors risk and methods, CoSHH and technical submittals setting up site rules general and for logistics, operations ect. performing inductions acting and site appointed first-aider amongst my areas of responsibility. Project tracking inregards site installation and coordination of site labour force at work faces.

June 2007 to June 2007

Installation Technician

Fitting external passenger boarding bridges on the Heathrow airport terminal 5 project

Electrical panel wiring and mechanical fit out

March2007 to June 2007

Electrician charge hand contracting through agent.

To CAPE ELECTRICAL & HAYDEN YOUNG

New build and refurbishment works electrical. 1 ^st and 2 ^nd fix Lights and Power through trunking, conduit and cable tray. Contactor panel's for lighting and small power in lab's wired from local Dist board and General install to current wiring regulations. Cape post was over seeing a refurbishment of a machine shop, storage unit, welding bay maintenance workshop mech/elect plant areas and welfare suits

February 2007 to March 2007 Quality Assurance Manager Electrical

Spent a short time with Phoenix Electrical as Site Quality Assurance

Setting up organizational structure to inherent company procedures

Checking quality characteristic for conformity to a client's specification and for deviations from,

With to regards applied concessions.

To include expectations from client for the remit for submittals/transmittals and applicable handover documentation

Conducting Inspection's and highlighting corrective action to be taken for conformity, pre-commissioning for handovers.

Whilst collating the information for the first as fitted drawings

Setting up the metrological confirmation onsite again to company procedures

Had just started a Traceability study on components selected for compliance with company procedures for grading with in the realms of ISO 9001/9002 bench marks, although construction had just moved in to its 3rd week.

Had one in house audit which I had done reasonably well with scoring around 80% at pre-construction phase

Really enjoyed the diverse work load which was very demanding, for which I had felt I had started to come through the step learning curve laid down by my QA manager with-in Phoenix

January 2007~Instalation electrician

Carrying out remedial and retests for compliance with BS7671 (Council, voids)

November 2006 ~December 2006

Electrician Rolling stock tech

Six week contract on the connect project install drivers cab radios carry out modifications to cab to accommodate the radio units, hand set's, Drivers interface and wiring looms trains take out off service for the night. Install carried out and trains back in service following morning after completed works precommissioned.

November 2006 ~Electrician DPSS

Employed on a at-hoc basis Short term, terminating s.w.a.'s into tunnel transformers and lighting at the new central line depot at White City.

August 2006 to October 2006

Electrician~Giffen though Redwood

Working as part off the installation team at Kings Cross lul station. Working as an electrician carrying out installations to drawings and lul specification.

March 2006 to July 2006

Electrical site supervisor ~Ruilion agy contracted to LJ Monks

Over seeing new build electrical installation off 500+ studio flats along with an arts centre and leisure suite sauna spa ect. 6 blocks off flats, installed included main panel feed from fixed 11K site transformer 6 Nr 300mm single core swa's feeding site main switch panels and 6Nr local panels feed in swa's 185 to 400mm c.s.a. all trenched and feed through ducts, rising bus bar with in each block, central mechanical plant room with 6 satellite plant rooms one per-block all with own electrical installs lights local d.b.'s BMS set ups. F.A. system, disabled alarm system, Intercom, comm.'s, t.v through out each block, external lighting and some small power.

January 2006 to March 2006

Support fitter signalling systems ~TUBELINES

Given the grade MDT to start training as a Tech Officer on the Piccadilly line Signaling systems

Whilst employed spent the most off my time training and learning basics. Signaling philosophy, alphabet. Basic track circuits and points systems. Working towards critical safety certs. Track Comp, Track Accustomed Protection Master Eng. and Traffic hours.

July 2005 to December 2005

Electrical Design Engineer ~ CORBERC105 St Pancras

Working as a design engineer, preparing and revising designs (long hand), drawings (Autocad dwg files) for lights power and c.m.s. along with and equipment/cable schedules and dist board layouts, for LV sub-circuit distribution. Keeping these contractual documents up to date. Working with other departments to achieve Co-ordination room layouts and for applicable services, HVAC, Fire suppressions services, Security, P.A.V.A, Comm's, F.A. with in a fast moving operational environment to complete the M&E design of a grade 1 Listed international train and London underground tube station

June 2005 to July 2005

Electrical fitter for METRONET~TMU(agy)

Carry out modifications to the exiting fleet on the Piccadilly line. Working from electrical schematics, installing wiring looms and fitting auto drive boxes, panel work.

April 2005 to May 2005

Contracting through agent

Carrying out install in a refurbishment of existing NHS building lights and small power.

January 2005 to April 2005

Electrical fitter for METRONET~BVC power & electrical (agy)

Carry out planned maintenance to lights and power in stations and through tunnels to section 12 and 13 basically re-lamping and cleaning light fittings.

January 2005 to March 2005

Electrical engineer ~ Palmac electrical

Carrying out surveys for costing/and compliance with BS7671 with in West London Health Estates and local schools with in west London. Some install works involved.

September 2004 to January 2005

Electrical Project Engineer MJQuinns Integrated services Ltd(agy)

Working on the refurbishment of a London Underground station under the project manager.

As a production engineer/night shift project manager. As part of the station modernisation of equipment program. Started the project at post-tender stage just as programs and construction issue drawings were being finalised. Although the build was underway.

Daily duties ~ Ensuring protection masters, T-spics and nom-spics were in place arranging work placements for crew's incompliance with method statements with-in the station for the installation of electrical services Taking off from drawings, a massing bills for procuring materials, resourcing labour for shifts writing shift reports from the night shift to keep day time project manager up to speed with developments. Overseeing the engineering hours shift and dealing with any design related issues thrown at me. Tracking installed CMS and general progress planning works with project manager and appointed track spics. Raising installation issues and resolving them as and when they arrived in accordance with LUL engineering standards applicable for the installation. Verify safe isolations were carried out locked off and permits to work were signed off. (EWN) delay notices in respect to possessions at station and delays in hand overs from other work parties. Ensuring the logistics of materials/plant to site for shifts. Checking calibration certs and plant reg was up to date. Pat tests and off hire dates.

July2004 to September 2004

Fitter/Testing Engineer HKH

Electrical fit-out for a project in Wembley new build then moved to a social housing project testing for compliance with BS 7671, NICEIC. Working self-employed testing recorded on pocket pc using am-tech fast test suite.

February 2004 to July 2004

Electrical Project's Engineer for Swift line Engineering Ltd

Whilst working on several contracts for then current employer (these include NHS hospitals and public sector buildings) for what is best described as a projects engineer electrical for which I was raising RFI from contract specifications, creating from my take off's full breakdowns on products and the quantities involved in these projects submitting bills of quantities to wholesalers evaluating data from these and purchasing goods, there was a small amount of design and build work on going at projects from with in the office where cad files have to be revised to suit current works. I was in trusted with two projects at post-tender gathering information on the specification to price works to be carried out, materials, labour times, ect. I also acted as an extra body on installations during times of leave for key members of the installation crews.