QUALIFICATIONS

CSWIP 3.2 Senior Welding Inspector.

PCN 3.2 Radiographic Interpreter all groups gamma & x ray.

Lloyds Register Quality Assurance Approved Lead Assessor/ Lead Auditor.

Lloyds Register Quality Assurance Approved Internal Auditor.

European Senior welding inspector.

International welding inspector

International institute of welding diploma.

Professional Memberships:

Fellow of the International Association of Quality Practitioners.

Member of the British Institute of NDT.

Licensed Engineering Practitioner.

EMPLOYMENT

Oct 06-Present - QA/QC Supervisor, Heerema, Hartlepool.

Working for AJS as part of the client on site management team

On the Shell Sean Compression Module under construction at

Heerema, Hartlepool. Duties inclusive of but not restricted to the

Following: Interpretation of radiographs to ASME B31.3 & Shell ES124

Part 1, review and appraisal of contractor and sub contractor

ITP'S, Quality plans, method statements, stress charts, welder

Registers and weld procedures. Monitor and witness of preservation

Procedures, on site audits of contractor and witness of contractors

In house audits. Weekly review of weld repair statistics, off site visits

To sub contractors to review that procedures are correctly being

Utilised and on site quality checks prior to release of sub contracted

Components. Off site interpretation of radiographs. Liason with

Lloyds for PED scope of work and audits performed with Lloyds

To ascertain compliance with PED requirements. Monthly meetings

With the appointed Independent Competent Person, Bureau

Veritas, for compliance to safety critical elements and performance

Standards.

July 06-Oct 06 - Inspection Engineer, Bacton, Norfolk.

Employed by Amec as an inspection Engineer on the Bacton BBL

New phase of the National Grid gas plant. Responsible for the punch

Out of all pipe-work, the raising of punch-lists and close out of the

Remedial actions. Inspection of structural steelwork, releases for

Grouting and the punch-listing of outstanding works. Line walks

Of completed piping systems to ascertain mechanical completion,

Sign off completed systems in the Shell EDS system. Witnessing of

Hydro-tests and line walks for re-instatement after testing.

May 2006 -Site Quality Lead Arendal/ Emtunga yards in Sweden.

Site Quality lead on the Adriatic LNG project based in two yards at Emtunga and Arendal in Gothenburg on the construction of living quarters, jetty shelter and operation buildings. Duties included the

review and appraisal of quality assurance documents, quality plans and inspection and test plans. Review and correction of welding procedures and welder certificates,contractors quality documents and procedures. Inspection of materials and material control procedures, appraisal and audit of contractors nominated sub contractors for blast and painting and fire-proofing.

2000-2006. Quality Control Engineer/ Senior Inspector at Swan Hunter Tyne-side.

Responsible for the complete department of inspectors, certification engineers, NDT technicians, dimensional surveyors and painting inspectors. Past projects include FPSO construction, sub sea templates, modules and new build on two ALSL ships for the Ministry of Defence.

Duties inclusive of but not restricted to the setting up and auditing of the quality control system, welder qualifications, ship dry surveys, interpretation of radiographs TO AWS D1.1, ASME 1X, EN288 & 287, EEMUA 158, BS4515 Parts 1 & 2,ANSI B31.3, running of weld procedures, trouble shooting and problem solving. Liason with clients, surveys of compartments pre and post client inspections,organising daily inspection activities with a hands on approch to all aspects of inspection and quality control.

1999-2000 QA Engineer/ Office Manager for ABB PLC.

Working on the re-powering and new construction of the Peterhead power station at Boddam, Scotland. Duties included the management of all personnel, appraisal of all documentation and data packs prior to submission for final approval. Attending planning and progress meetings to comply with target dates, review of systems for mechanical release prior to hydro-testing and review of stress relieving charts. Radiographic interpretation of all pipe-work to ASME B31.1. Internal auditing of construction departments.

1999 QA Engineer for ABB PLC.

Employed on the Enfield Power Station as a QA Engineer compiling and reviewing documentation packs for fuel oil, raw water, power oil, boiler blow down and hydraulic safety systems. The interpretation of boiler pipe-work radiographs and all NDT reports.

1996-1999QC Engineer/ Senior Welding Inspector at Swan Hunter Tyne-side. Duties included assisting in the attainment of ISO9001, auditing all works departments, raising and closing out non conformance reports, the management and day to day running of all inspection personnel. Attending meetings, ensuring target deadlines were achieved. Projects worked on included Elgin Franklin sub sea covers, the Talisman Ross project and the Solitaire ship conversion for the Societe d'Exploitation du Solitaire. Work performed on stingers, bulkheads, helidecks etc.

1995-1996 Senior Client Inspector for BHP Petroleum Limited ( Offshore)

Senior Client Inspector on the hook up of the Liverpool bay

Wellhead, processing deck and accommodation deck.

Responsible for all inspection personnel, work performed on riser

Pipe-work, super duplex, alloy 28, inconel, cunifer and carbon steel.

1994-1995 Client Welding Inspector for BHP Petroleum Limited.

Employed as a client welding inspector on the construction of the

Liverpool Bay central processing deck at Heerema Hartlepool.

1993 Client Inspector for ABBGE/ Statoil in Norway.

Working on the Sleipner Land Gas terminal at Karsto, Norway.

1991-1992 Client Inspector for Hamilton Oil Company.

Client inspector on the construction of the Hamilton oil

compression deck for the Ravenspurn North field.

1990-1991 Client Inspector for Hamilton Oil Company.

Client inspector on the ST3 Satellite module, jacket and pile

Sleeves for the Ravenspurn North field.

1989-1990 Client Inspector for Hamilton Brothers Oil and Gas.

Client inspector on the Ravenspurn North central production

deck.

1988-1989 Welding Inspector for Balfour Beatty Fairclough.

Employed as a welding inspector at Sellafield Thorpe 3 site.

1987-1988 Welding Inspector for Redpath Offshore South.

Working on the BP Cleeton accommodation module and heli-

deck for the Southern North Sea Gas project.

1986-1987 Welding Inspector for Redpath Offshore North.

Employed on the Shell Tern Topside modules.

1985-1986 Welding Inspector for Cleveland Offshore.

Working on the BP South East Forties Topside Modules.

1984-1986 Welding Inspector for Cleveland Offshore.

Working on the Ben Odeco Ocean Alliance 2002 semi-submersible

Drilling rig also the Chevron module for the Ninian field and the 6 ^th

October bridge for Cairo.

1983-1984 Welding Inspector for Highland Fabricators.

Welding inspector on the Conoco tension leg platform for the

Hutton field.

1982Welding Inspector for the British Pipe-line Agency.

Pipe-line welding inspector working at Norfolk and Norwich.

1980-1982 Fabricator/Welder for supaflo Limited.

1978-1980 Fabricator/Welder for Castrol Limited.

1976-1978 Foreman Fabricator at Metal Craft.

1974-1976 Fabricator/Welder for Whaley Welding.

1968-1974 Apprentice & Time served fabricator/welder.

Summary: Involved in fabrication and welding for the last 40 years, the last 30 years revolving around inspection and NDT. Any further information that you feel you may require please do not hesitate to contact me on any of the points of contact stated on page 1.