Experience

2007 ~Present Mechanical Development Engineer at Cummins Engine Darlington

· Reporting to Chief Engineer at Design Department

· Part owner and developer for the exhaust manifold, turbocharger, turbo plumbing and exhaust outlet connection ~ Managed to released new parts with total cost saving USD 15M/year

· Experiences in FMEA, DVP&R, ProE modelling, flow analysis, DFA, DFM and Six Sigma

· Member of the Failure Investigate Review Group (FIRG)

2006 ~2006 Quality Auditor at the PSA Peugeot Citroen Car Ryton Plant

· Reported to the Quality Manager at Peugeot Cars Production Plant

· Verified car quality through Peugeot NORM testing procedures

· Carried out assessments on the mechanical, body & trim and electrical/electronics faults

· Exposed to the track driving assessment

2004 ~2005 Researcher at the University of Warwick

· Researched in the automotive engine development

· Tutored for the Computer Aided Design (SolidWork2005)

· Presented paper at the International Conference of Manufacturing and Material Processing (ICMM2006)

2002 ~2004 Engine Development (A Collaboration project with the Powertrain Limited)

· Gained hands-on experiences in the development of 1.8 litre petrol engine

· Designed and developed engine test rig for experiment Particle Image Velocimetry experiment

· Attended Star-CD course organised by CD Adapco Group. The course structure is designed through the processes associated with setting up, running and post-processing

· Attended the Computer Aided Design Course at City College of Coventry and obtained the certificate of City and Guilds in AutoCAD-3D

New Entrepreneur Scholarship (NES)

Successful completing NES programme organised by National Federation of Enterprise Agencies, West Midland. The training is designed to develop a good understanding in a marketing and starting a new business.

Engineering Ambassador

Worked for Imagineering Club within West Midland area in encouraging children of primary school to become the next generation of engineers and scientists

2001~2002 Formula Student Team

Directly involve in designing and manufacturing a transmission system for the single-seater Formula Student car. This project was supervised by Prof. Glynn Bowsher, Chief Engineer of the World Land Speed Record Thrust SSC

2000 ~2001 Placement Design Engineer at Dana SU Automotive-Birmingham

· Actively involve in researching to define the sensitivity of manufacturing tolerances towards oil pump performances

· Designed the 'Intelligent'-pressure-relief valve.

· Attended in-house professional courses including;

i. Design of Experiment (DOE)

ii. Design for Manufacture and Assembly (DFMA)

iii. Failure Modes and Effect Analysis (FMEA)

iv. Automotive Electronics

· Conferred Licentiateship of the City and Guilds of London Institute in Professional Development

1999 ~2000 Failure Analysis for World Rally Champion's car

Worked in a selected team to investigate the cause of drive shaft failure in the Subaru Impereza model

1997~1998 Trainee at Mitsubishi Motors Corporation Nagoya Japan.

· Trained to understand the principle of Gasoline Direct Injection (GDI)

· Qualified to perform overhaul on GDI Engine practically

1992~1999 Lecturer at Mechanical Engineering Department of Malaysia Polytechnic

· Taught the Strength of Materials subject theoretically and practically

· Involved in the engine performances test experiment

1990 ~1991 Technician at Matsushita Precision

· Worked in R&D department to redesign and improve the assembly line system in manufacturing

· Certified by the Sanno Institute of Management of Japan with Manufacturing Management Assistant

Educational Background

2003~2004 MSc in Advanced Mechanical Engineering from the University of Warwick, United Kingdom

1999~2002 BEng (Hons.) Automotive Engineering Design from Coventry University, United Kingdom

1997~1998 Certificate of Automotive Technology with Japanese Language from Chiba Polytechnic, Japan

1991~1992 Certificate of Technical Education (Automotive Engineering) from Teacher Training College, Malaysia

1987~1990 Diploma in Mechanical Engineering from University Technology of Malaysia (UTM)

Computer Skills:

Microsoft Office, ProEngineer Wildfire with ProMechanica, StarCD (CFD), ADAMS 10, ANSYS 5.7, AUTOCAD2000, SolidWork2005, Adobe Premier, TEAMSET and MatLab