CURRICULUM VITAE

DETAILS

QUALIFICATIONS City & Guilds Aeronautical Engineering Studies Parts I, II & III

INTERESTS Fishing, Shooting Computers and Motorcycling

OTHER Non Smoker, Clean Full Driving License

CAREER DETAILS

COMPANY Vapor stone

PPOSITION Site person in charge

DUTIES Door and pressure ventilation system overhaul of 92 stock central line trains

at Ruislip depot. Running the above project as site person in charge,

Inspection and pre and post testing of units including traction test, brake

decoder checks Checking version of software and uploading of the D T S

modules, Scope testing of door interlocks

CERTIFICATES Depot track competent, Fire awaeness, Fire warden, Site person in charge

HELD (non track locations), and Area A for LUL

DATES March 2004 untill present

COMPANY Serco C/O Ace Aviation

POSITION Technician/inspector

DUTIES 1^st and 2^nd line Maintenance on Lynx and Gazelle up to B5 and majors

Including main rotor head rigging ,tracking and balance and in flight testing

Using rotor tune equipment in flight and defect diagnosis and retification

At Wattisham Airfield

DATES July 2003 to March 2004

COMPANYMarshallsof Cambridge

DUTIES Detail fitting and sub assy

Manufacturing of B747 Auxiliary fuel tanks including the plumbing and

Testing of the fuel system and the pressure testing of the structure

Operators approval held with full Boeing approvals

DATES July 2001 to July 2003

COMPANYAeronavali Naples Italy C/O Heaveylift Engineering

DUTIES Structural repairs on B707 fuel tanks/Routine servicing

DATES May to July 2001

COMPANYMarshallsof Cambridge c/o M.P.I.

DUTIES C check on L1011 Tristar including flying control rigging, overhaul servicing

And testing of hydraulic systems

DATES May 2001

COMPANYINFLITE REGIONAL AIRCRAFT, Stansted airport

POSITION Aircraft technician/Leading Hand

DUTIES Scheduled maintenance, defect diagnosis and rectification, structural repairs,

Servicing and testing of the hydraulic, air conditioning, pressurisation and

Oxygen systems

Position held leading hand on Bae146/RJ.

DATES April 2000 to May 2001.

COMPANYMonarch Technical Support

POSITION Aircraft Technician

DUTIES Maintenance and structural repairs /routine servicing and component changes

On the hydraulic, air conditioning, pressurisation and engines

on Boeing 737,757, and Airbus A320, A321 and A300

DATES March 1999 to April 2000

COMPANYINFLITE ENGINEERING SERVICES LTD/ INFILTE THE JET CENTRE

POSITION Working Supervisor

DUTIES Responsible for the running of the C130J engine nacelle assembly area .

Maintenance of RJ 146 whilst at the Jet Centre.

DATES January 1996 to March 1999

COMPANYF.L.S. Aerospace via Staffhire

Maintenance and structural repairs on Boeing 747, 737, 727, and 707.

Including the 1241 mod and the slingshot mod on the Saudi and British

Airways 747. Including the rigging of the cabin doors and emergency

Escape slide system.

DATES October 1994 to January 1996

COMPANYH.E./ Inflite Engineering Services LTD

DATES February 1990 to October 1994

DUTIES New build manufacture of aircraft assy's i.e. Jetstream elevators, ailerons and

tabs.

Shorts Tucano canopy.

Extensive refurbishment of structural, mechanical and hydraulic assemblies on

VC10 and Nimrod also hydraulic testing of the above Approved operators

stamp held for surveying and testing of the above.

COMPANYMAN Roland c/o Industry service Europe LTD

DATES August 1989 to February 1990

DUTIES Contract in Germany assembling. Testing,and the commissioning of the MAN

Roland newsman 40 printing press. This involved assembling of the press

In Germany striping it down after test then reassembling on site and then

Commissioning the press before handing it over to the customer. The press

Was for the newspaper industry the customer was news international,Virginia

Street London (The Sun newspaper)

COMPANYField Aircraft Services Heathrow LTD

DATES February 1989 to August 1989

DUTIES Six month contract at R.A.F. Brize Norton , Structural repairs /routine

Maintenance and servicing on VC 10

COMPANYMBB c/o Interlord

DATES August 1988 to February 1989

DUTIES Six month contract in Germany at M.B.B. Lemwerder

Large structural repairs to Transall C-160/Defect diagnosis and rectification

COMPANYField Aircraft Services Heathrow LTD

DATES February 1988 to August 1988

DUTIES Six month contract in Holland at Fokker B.V.

Installing freight bay lining structure, carrying out customer mods to accept

different configurations of galley's toilets etc and the associated pipework

COMPANYBAE Aircraft Group (Hatfield)

DATES September 1981 to February 1988

DUTIES On completion of my apprenticeship I worked on the nose equipping dept

installing and testing all the pipe work in the nose. I carried out these duties

for around one year after which I transferred to aircraft finals, my duties

included engine installation and fitment of all associated ancillaries, engine

throttle rigging, A.P.U. installation, clearing of any snags picked up on the

final inspection of the aircraft prior to engine runs all of this work was on the

BAE 146.

ADDITIONAL

QUALIFICATIONS 1982 - E.I.T.B.

Certificate of first year training

Broad based training of fabrication engineering

Time Served Apprentice

1985 - E.I.T.B.

H03 - MECHANICAL FITTING

H09 - AIRFRAME AND SYSTEMS FITTING

COURSES BAe 146/RJ ALF507-IF/ALF502R Course passed on 20/12/2000